Epson is among the top printer makers that have a broad selection of models for printers. These printers are well-known because of their dependability and simple interface. When you’ve set up the Epson Printer, then you can print it out at a high speed and with quality. However, sometimes the printer will start showing an error code 031008 and Epson error code oxf1 when printing printouts. The printer may display this error message due to issues with the printer’s files. The user must repair the printer files to fix this Epson error.
Table of Contents
Common Causes of Epson Error Codes on Printers
- The printer is not able to accept a print job.
- Epson printer isn’t connected
- Computer viruses can corrupt the printing process
- The ink cartridges aren’t functioning.
- The printer driver isn’t installed on the computer
Troubleshooting Epson Printer Error Code 031008
Run Printer Troubleshooter
Epson printers may show errors when printer-related files do not function properly. To correct the Epson issues users should attempt to use the troubleshooter. The troubleshooter is under the Update and Security tab. Find the printer troubleshooter tool and use it on the device.
After fixing the files, you can try to take the printouts using the Epson device. It is recommended that users run an antivirus on their PC. Print jobs can become corrupted by viruses. Remove the virus to ensure that the printer is able to find the right job and print prints in a reliable manner.
Restart the printer of Epson
If your Epson Printer is not printing correctly, it is recommended to restart the printer. It is recommended to go to the printer, and test the functions of the printer. If any printer functions aren’t working properly, you must restart the printer. The power restart is required to restart the printer services from scratch. Once the printer has been switched on, remove your power cord. It will take a while until the printer’s battery is completely discharged. Reconnect the cable, and the printer will begin to function at the beginning. Then you can take a printout.
Verify your Epson Printer Software
Driver software and printer software are required to run the printer. If you don’t have this software, your Epson printer is in trouble. It is unable to print the job done and will display errors. The user needs to install the program on each device that is connected to the printer. Every model of printer has distinct drivers. It is impossible to use the same Epson driver for every model. Make sure you have the appropriate driver for the printer you have.
The driver needs to be updated frequently. Install the latest update and verify the status of your printer. If the driver files for your printer are damaged or missing, then you must restart the installation of the latest Epson driver. Once the printer driver has discovered the latest driver, it’ll begin communicating with your PC and printouts.
Look for the Cartridges
The cartridges in your Epson printer will show error code 031008 after installation correctly. If Epson cannot get the ink and stop printing, the printer will cease functioning. It is necessary to examine the slots of the cartridge. Visit the Epson printer, and then unlock its access door. Examine the ink on the cartridges. Remove the cartridge, and examine the pins and contacts. If any pin is damaged or bent, then you need to replace the cartridge. Clone cartridges can also result in an error since the printer isn’t able to read these cartridges properly.
If you have a clone cartridge, change it to a genuine Epson cartridge. If you don’t wish to buy the original cartridge each time fill it with ink, then refill it onto the cartridge. When installing the refill cartridge, make sure to verify the status of the slot. In the event that your Epson device isn’t able to read the cartridge that has been refilled, then you must uninstall all cartridges, and then replace them using the newly filled one. When your Epson device has the right cartridge, it will begin working and the user can print prints.
Eliminate all Pending Jobs out of Epson Printer Epson Printer
The user is greeted with error code 031008 when memory has been emptied and you’re trying to enter the command. If the error occurs then the user must attempt to remove all open tasks from Epson. On the computer connected navigate to the Printers, Devices as well as Printers folder. Pick your Epson printer, and then click the See What’s Printing option. Then, check the print job and click then the Cancel button. After canceling, restart the printer and provide a print instruction.